Hot selling semi automatic 2 cavity pet blow molding machine

The WATON’s semi automatic 2 cavity pet blow molding machine is the ultimate solution for cost-efficient, high-quality PET bottle production. Whether you're a small shop just starting out or a large manufacturer looking for a reliable, high-volume solution, this machine is sure to give you the consistent results you need.

With a 2 cavity design, you can produce up to 1,200 bottles per hour without sacrificing quality or accuracy. The semi-automatic operation means that you don't need a highly skilled operator to run the machine, saving you time and money on training.

The WATON machine is built to last, with a durable steel frame that can handle the rigors of daily use in any production environment. The machine also features a user-friendly control panel that makes it easy to set and adjust production parameters, ensuring that you get the exact results you need every time.

One of the key features of the WATON’s semi automatic 2 cavity pet blow molding machine is its versatility. Whether you're producing water bottles, soft drink bottles, or other products, the machine can handle a wide range of bottle sizes and shapes, giving you the flexibility you need to adapt to changing market demands.

With low maintenance requirements and a long lifespan, the WATON machine is an excellent investment for any production operation. Whether you're looking for a dependable, high-quality solution for your own business, or you're looking for an affordable way to expand your production capabilities, the WATON’s 2 cavity pet blow molding machine is the perfect choice

Hot selling semi automatic 2 cavity pet blow molding machine

MS-2L2 Semi-Automatic Stretch Blow Molding Machine Blower is the most stable two-step semi-automatic PET stretch-blow molding machine, it could be 1-cavity for maximum 5L bottle or 2 cavities for below 3L. It can blow bottles in various shapes: carbonated, mineral, pesticide, hot-filling, cosmetics, wide-mouth, and other PET packing containers

Advantages：

●1. High quality: controlled by intelligent Touch Screen & PLC system ●2. Suitable for wide neck jar production ●3. Capacity:700-1000BPH with 2 cavity ●4. Protection sensors ensure operator’s safe: once any object / hand above the mold area, Mold Closing will stop

●5. Low cost: low consumption of electricity, air ●6. Easy maintenance, absolute safety, low noise

Machine Model	MS-2L2
Production Capacity (BPH)	700-1,000
Max. Bottle Size	3000 ml
Max. Bottle Diameter	105 mm
Max. Bottle Height	360 mm
Mold Cavity	2 cavities
Mold Clamping Force	66.48 KN
Mold Opening Stock	270 mm
Mould Thickness	120-200 mm
Mould Width X Height	340 mm X 340 mm
Preform Neck	28-60 mm
Preform Length	--
Heating Power	22 KW
General Power	25 KW
Blow Air	2.6 – 3.0 MPa
Drive Air	0.8 – 1.0 MPa
Main Machine Dimensions	1650 * 650 * 1700 mm
Oven Dimensions	1700 * 850 * 1350 mm
Main Machine Weight	820 KGS
Oven Weight	250 KGS

WATON Machinery is a professional manufacturer of PET bottle blow molding machine, located in Taizhou City, Zhejiang Province. WATON with independent research and development team, Quality Control team, Personnel with postgraduate degree

Our technical team has more than 20 years of production experience and absorbs advanced technology at home and abroad. After years of research, develop and improvement, WATON Machinery has owned several mature machine models to meet with customers difference requirement, can make PET bottles from 20ml to 20L, with capacity up to 13,000 bottles per hour

Our machinery has been exported to more than 20 countries around the world, including US, Europe, Australia, Mid-east, Indonesia, Thailand, Africa, etc

Q1: Where is your factory located? How can I visit there

A1: Our factory is located in Shangnian Industrial Area, Huang Yan, Taizhou City, Zhejiang Province, China. All our clients, from home or abroad, are warmly welcome to visit us! From Shanghai to our city, it takes 3.5 hrs by train, 45 mins by air

Q2: How long is the warranty period

A2: All of products have two years warranty

Q3: How can I install my machine when it arrives

A3: We will send our engineer to your side as soon as you get all your machines ready, for testing and teaching your technicians how to run the machines

Q4: How long is the delivery time

A4: Under normal conditions, products are delivered within 45 working days

Q5: Where is the Shipping departure port

A5: Ningbo or shanghai port

Q6: What’s the payment

A6: T/T, L/C, Western Union, paypal

Q7: What are your main brand of electrical components

A7: Main parts in the products come from world famous manufacturers such as Mitsubishi, Schneider, Omron etc

Q8: Which country do you export your machines already

A8: We have exported Blow Molding Machine to USA, Canada, Australia, Mexico, Russia, Thailand, Indonesia, Vietam, Africa, the Middle East area etc

Q9. What products does your company offer by yourself

A9: We are specialized in PET Blow Molding Machine, PET Blow Mold, hot-runner PET Preform Mold

Q10: How about the quality of machine

A10: WATON have been focusing on quality issues, quality control from beginning to the end, and we will test machine strictly before packing and delivery.